Table of Contents Table of Contents
Previous Page  9 / 66 Next Page
Information
Show Menu
Previous Page 9 / 66 Next Page
Page Background

Tarry B CLEAN ALUMINUM PISTONS WITH STRUTS

Shall consist of clean whole aluminum pistons with

struts. Material is to be free from bushings, shafts, iron

and non-metallic items . Oil and grease not to exceed

2%.

Tarry C IRONY ALUMINUM PISTONS

Shall consist of aluminum pistons with non-alumi-

num attachments to be sold on a recovery basis or

by special arrangement between buyer and seller.

Tassel OLD MIXED ALUMINUM WIRE AND CABLE

Shall consist of old, unalloyed aluminum wire and

cable which may contain up to 10% 6000 series wire

and cable with not over 1% free oxide or dirt and free

from hair wire, wire screen, iron, insulation and other

non-metallic items.

Taste OLD PURE ALUMINUM WIRE AND CABLE

Shall consist of old, unalloyed aluminum wire and

cable containing not over 1% free oxide or dirt and

free from hair wire, wire screen, iron, insulation and

other non-metallic items.

Tata NEW PRODUCTION ALUMINUM EXTRUSIONS

Shall consist of one alloy (typically 6063). Material

may contain “butt ends” from the extrusion pro-

cess but must be free of any foreign contamination.

Anodized material is acceptable. Painted material

or alloys other than 6063 must be agreed upon by

buyer and seller.

Toto ALUMINUM EXTRUSIONS “10/10”

Material to consist of new production and old/used

6063 extrusions that may contain up to (but not

exceed) 10 percent painted extrusions and 10 per-

cent 6061 alloy extrusions. Must not contain other

alloys of aluminum. Material should be free of zinc

corners, iron attachments, felt, plastic, paper, card-

board, thermo break, and dirt and other contami-

nants.

Tutu ALUMINUM EXTRUSION DEALER GRADE

Shall consist of old extruded aluminum of one

alloy, typically alloy 6063, 6061, or 7075. Material

must be free of iron, thermo break, saw chips, zinc

corners, dirt, paper, cardboard, and other foreign

contamination. Percentages of paint or other

alloys to be agreed upon by buyer and seller.

Teens SEGREGATED ALUMINUM BORINGS AND TURNINGS

Shall consist of aluminum borings and turnings of

one specified alloy. Material should be free of oxida-

tion, dirt, free iron, stainless steel, magnesium, oil,

flammable liquids, moisture and other non-metallic

items. Fines should not exceed 3% through a 20

mesh (U.S. standard) screen.

Telic MIXED ALUMINUM BORINGS AND TURNINGS

Shall consist of clean, uncorroded aluminum borings

and turnings of two or more alloys and subject to

deductions for fines in excess of 3% through a 20

mesh screen and dirt, free iron, oil, moisture and all

other non-metallic items. Material containing iron in

excess of 10% and/or free magnesium or stainless

steel or containing highly flammable cutting com-

pounds will not constitute good delivery. To avoid

dispute, material should be sold on basis of definite

maximum zinc, tin and magnesium content.

Tense MIXED ALUMINUM CASTINGS

Shall consist of all clean aluminum castings which

may contain auto and airplane castings but no

ingots, and to be free of iron, brass, dirt and other

non-metallic items. Oil and grease not to total more

than 2%.

Tepid AIRCRAFT SHEET ALUMINUM

Should be sold on recovery basis or by special

arrangements with purchaser.

Terse NEW ALUMINUM FOIL

Shall consist of clean, new, pure, uncoated 1000

and/or 3000 and/or 8000 series alloy aluminum

foil, free from anodized foil, radar foil and chaff,

paper, plastics, or any other non-metallic items.

Hydraulically briquetted material and other alloys by

agreement between buyer and seller.

Tesla POST CONSUMER ALUMINUM FOIL

Shall consist of baled old household aluminum foil

and formed foil containers of uncoated 1000, 3000

and 8000 series aluminum alloy. Material may be

anodized and contain a maximum of 5% organic

residue. Material must be free from radar chaff foil,

chemically etched foil, laminated foils, iron, paper,

plastic and other non-metallic contaminants.

Tetra NEW COATED ALUMINUM FOIL

Shall consist of new aluminum foil coated or lami-

nated with ink, lacquers, paper, or plastic. Material

shall be clean, dry, free of loose plastic, PVC and

other non-metallic items. This foil is sold on a metal

content basis or by sample as agreed between buyer

and seller.

Thigh ALUMINUM GRINDINGS

Should be sold on recovery basis or by special

arrangements with purchaser.

Thirl

ALUMINUM DROSSES, SPATTERS, SPILLINGS, SKIMMINGS

AND SWEEPINGS

Should be sold on recovery basis or by special

arrangements with purchaser.

Thorn ALUMINUM BREAKAGE

Shall consist of aluminum with miscellaneous con-

taminants like iron, dirt, plastic and other types of

contaminants. Material can either be sold based on

aluminum recovery or content as agreed upon by

buyer and seller. Must contain a minimum of 33%

aluminum unless otherwise agreed upon by buyer

and seller.

INSTITUTE OF SCRAP RECYCLING INDUSTRIES, INC.

9

Guidelines for Nonferrous Scrap

CO D E I T E M

CO D E I T E M